| |
|
 |
| |
6-S摇床
6-S table |
一、主要用途和性能
6-S摇床是重力选矿的主要设备之一，它广泛应用于选别钨、锡、钽铌和其它稀有金属和贵重金属矿石。也可用于选别铁、锰矿石和煤。当处理钨、锡等矿石时，摇床的有效回收粒度范围为2-0.02毫米。
6-S摇床具有富矿比高，选别效率高，看管容易，便于调节冲程。在改变横向坡度和冲程时仍可保持床面运行平衡，弹簧放置在箱体内，结构紧凑，且能一次得出最终精矿和最终尾矿。
Main use and performance:
The 6-S table is one of gravitational segregation main equipment, it widely applies in the classification tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also may use in classifying the iron, the manganese ore and the coal. When ore and so on proessing tungsten, tin, the table effective recycling granularity scope is 2-0.2 millimeters.
The 6-S table has the high-grade ore compared to high, the classification effciency is high, safeguards easily , is advntageous for the adjustment stroke. When change cross fall and stroke still might maintain the surface of bed movement balance, the spring laid aside in box in vivo, the knot Constructs compact, also can time obtain the final ore concentrate and the final debris
二、结构
本摇床主要由床头、电动机、调坡器、床面、水槽、来复条以及润滑系统等八个部分组成。
Structure
This table mainly by the head of a bed, the electric motor, the accent slope,the surface of bed, the ore trough, the water though, comes the note in reply as well as the lubrication system and so on eight parts is composed.
| 名称 |
床面尺寸 |
最大给矿粒度 |
给矿量 |
给矿浓度 |
行程 |
频率 |
床面清洗水量 |
床面横向坡度 |
床面纵向坡度 |
床面尖灭角 |
选矿面积 |
床面长度比 |
床面断面形状 |
电机功率 |
传动机构 |
| 长度 |
传动端宽 |
精矿端宽 |
| 单位 |
MM |
MM |
MM |
MM |
t/d |
% |
MM |
f |
t/d |
度 |
% |
度 |
M2 |
? |
? |
KW |
偏心连杆机构 |
| 粗砂床面 |
4450 |
1855 |
1546 |
2 |
30-60 |
25-30 |
16-22 |
45-48 |
80-150 |
2°30′-4°30′ |
1.4 |
32-42 |
7.6 |
2.6 |
矩形 |
1.1 |
| 细砂床面 |
4450 |
1855 |
1546 |
0.5 |
10-20 |
20-25 |
11-16 |
48-53 |
30-60 |
1°30′-3°30′ |
0.92 |
40 |
7.6 |
2.6 |
锯齿形 |
1.1 |
| 矿泥床面 |
4450 |
1855 |
1546 |
0.15 |
15-25 |
15-25 |
8-16 |
50-57 |
10-17 |
1°-2° |
- |
42 |
7.6 |
2.6 |
三角型 |
1.1 |
备注：床面材料有木质和玻璃两种。
Note: The surface of bed material has the lignin and glass fiber reinforced palstic two kinds.
|
|
|
|
李先生